量具量儀中英文對照匯總

1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.條式和框式水平儀
bar form and square levels
6.合像水平儀 imaging level meter
7鑄鐵平板 cast iron surface plate
8.巖石平板 granite surface plate
9.鑄鐵平尺cast iron straigjht edge
10.鋼平尺和巖石平尺
steel and granite straigjht edge
11.圓度儀 roundness measuring instrument
12.電子水平儀electronic level meter
13.表面粗糙度比較樣塊鑄造表面 roughness comparison specimens cast surface
14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面
roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比較樣塊電火花加工表面
roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比較樣塊拋光加工表面
roughness comparison specimens pollshed surfaces
17.接觸式儀器的標稱特性
18.輪廓profiles
19.軌跡輪廓 traced profile
20.基準輪廓 reference profile
21.總輪廓 total profile
22.原始輪廓 primary profile
23.殘余輪廓residual profile
24.觸針式儀器stylus instrument
25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument
26.觸針式儀器的部件stylus instrument components
27.測量環measurement loop
28.導向基準renfence guide
29.驅動器drive unit
30.測頭(傳感器)probe(pick-up)
31.拾取單元tracing element
32.針尖stylus tip
33.轉換器transducer
34.放大器amplifier
35.模/數轉換器analog-to-digital converter
36.數據輸入data input
37.數據輸出data output
38.輪廓濾波和評定profile filtering and evaluation
39.輪廓記錄器profile recorder
40.儀器的計量特性metrological characteristics of the instrument
41.靜測力的變化change of static measuring force
42.靜態測力 static measuring force
43.動態測量力 dynamic measuring force
44.滯后hysteresis
45.測頭的測量范圍 transmission function for the sine waves
46.儀器的測量范圍measuring range of the instrument
47.模數轉換器的量化步距quantization step of the ADC
48.儀器分辨力 instrument resolution
49.量程分辨力比range-to-resolution ratio
50.測頭線性偏差probe linearity deviation
51.短波傳輸界限short-wave transmission limitation
52.輪廓垂直成分傳輸 vertical profile component transmission
53表面粗糙度比較樣塊拋丸、噴砂加工表面
roughness comparison specimens shot blasted and blasted surfaces
54產品結構幾何量計術規范（GPS）geometrical product specifications(GPS)
55表面結構 surface texture
56接觸式儀器的標稱特性 nominal characteristics of contact instruments
57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth
58最大允許誤差 maximum permissible error
59圓柱直齒漸開線花鍵量規 gauges for straight cylindrical involute splines
60齒厚游標卡尺 Gear tooth vernier
calipers
61齒輪漸開線樣板the involute master of gear
62齒輪螺旋線樣板 the helix master of gear
63矩形花鍵量規 gauges for straight –sided splines
64測量蝸桿 master worm
65萬能測齒儀 universal gear measuring instrument
66萬能漸開線檢查儀universal involute measuring instrument
67齒輪齒距測量儀gear circular pictch measuring instrument
68萬能齒輪測量機 Universal gear measuring machine
69齒輪螺旋線測量儀gear helix measuring instrument
70便攜式齒輪齒距測量儀 manual gear circular pitch measuring instrument
71便攜式齒輪基節測量儀manual gear base pitch measuring instrument
72立式滾刀測量儀vertical hob measuring instrument
73齒輪雙面嚙合綜合測量儀Gear dual-flank measuring instrument
74齒輪單面嚙合整體誤差測量儀Gear single-flank meshing integrated error measuring instrument
75梯形螺紋量規 gauges for metric trapezoidal screw threads
76工作螺紋量規work gauges for metric trapezoidal screw threads
77校對螺紋量規check gauges for metric trapezoidal screw threads
78.梯形螺紋量規型式與尺寸 Types and dimensions of metric trapezoidal screw threads
79.普通螺紋量規型式與尺寸 Types and dimensions of gauges purpose screw threads
80.非螺紋密封的管螺紋量規 Gauges for pipe threads prcessure-tight joints are not made on the threads
81.螺紋千分尺
Screw thread micrometer
82.最大允許誤差 maximum permissible error
83.間隙螺紋量規 Clearance screw gauge
84.量針
Bar gauge
85.螺紋樣板 Screw thread template
86.用螺紋密封的管螺紋量規
Gauges for pipe threads where pressure-tight joints are made on the threads
87.刀具預調測量儀 精度
Accuracy of the presetting instrument
88.薄膜式氣動量儀
Membrane type pneumatic measuring instrument
89.光柵線位移測量系統
Grating linear displacement measuring system
90.光柵角位移測量系統
Grating angular displacement measuring system
91.磁柵線位移測量系統
Magnet-grid linear displacement measuring system
92.量塊附件
Accessories for gauge blocks
93.V形架
Vee blocks
94.比較儀座
Comparator stand
95.磁性表座
Magnetic stand
96.萬能表座
Universal stand for dial indicator